FARWEST PAINT PRODUCT INFORMATION
Primers & Pre-Treatment Coatings
#1030 Black Rynolite Etching Primer
PRODUCT TYPE: Alkyd Rust-inhibiting Etching Primer. (Satin Sheen)
DESCRIPTION: This product offers fast air drying, excellent adhesion, durability and easy application qualities. It is a complete ready-to-use primer that cuts through the typical thin layer of surface metal oxide and adheres well to the metal itself.
Intended Use: For use on non-ferrous metals such as aluminum and copper because of its built-in etching ability. Also performs well on ferrous surfaces as a general purpose primer.
VISCOSITY: 60-65 k.u.
DRY TO TOUCH: 15 minutes
WEIGHT SOLIDS: 52-54%
TACK FREE: 30 minutes
VOLUME SOLIDS: 36-38%
TIME TO RECOAT: 2 hours
WEIGHT PER GALLON: 9.85 lbs. per gal.
DRY HARD: 2 hours
V.O.C.: 538 grams per liter
COLOR RANGE: Black
FLASH POINT: 50° F.
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: 300 square feet per gallon @ approximately 2.0 mils dry.
SURFACE PREPARATION: Surface to be coated must be free of all loose dirt or scaling paint and any other foreign material. All loose rust scales should be removed either by wire brushing, light sandblasting or with Farwest #695 Rynolite Chemical Cleaner-Etcher.
APPLICATION: Brush or spray.
THINNING: Thin if necessary with Farwest Toluol.
CLEAN-UP: Equipment and tools may be cleaned with Farwest Toluol or Farwest #615 Wash Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.