FARWEST PAINT PRODUCT INFORMATION

Primers & Pre-Treatment Coatings

X-1184 Quickset Red Oxide Primer

COLOR(S): Red.

PRODUCT TYPE: Rust-inhibiting Red Oxide Primer.

DESCRIPTION: A fast-setting rust-inhibiting primer. It is based on a zinc chromate-ferric oxide anti-corrosion system. This primer binds rust to the metal and seals out rust-causing air and water.

Intended Use: To prime new or rusted metal.

PHYSICAL CHARACTERISTICS

VISCOSITY: 70-75 k.u.

DRY TO TOUCH: 30 minutes

WEIGHT SOLIDS: 62-64%

TACK FREE: Approx. 2 hours

VOLUME SOLIDS: 41-43%

TIME TO RECOAT: 2 hours

WEIGHT PER GALLON: 10.40 lbs. per gal.

DRY HARD: 4 hours

V.O.C.: 449 grams per liter

COLOR RANGE: Red

FLASH POINT: 25 F.

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 300-350 square feet per gallon @ approximately 2.0 mils dry.

SURFACE PREPARATION: Remove loose rust with Farwest #695 Rynolite Chemical Cleaner-Etcher and wire brush. Surface should be free of all contaminants.

APPLICATION: Stir thoroughly before use. Brush, roller, or spray. It should not be thinned unless absolutely necessary.

THINNING: Thin if necessary with Farwest #605 Synthetic Thinner.

CLEAN-UP: Equipment and tools may be cleaned with Farwest #605 Synthetic Thinner or Farwest #615 Wash Thinner.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.