FARWEST PAINT PRODUCT INFORMATION

Exterior Finish Coatings

#420 Body & Trim Gloss House Paint

COLOR(S): White and Tints.

PRODUCT TYPE: Alkyd Gloss Enamel.

DESCRIPTION: An extremely durable, easy-brushing enamel for marine use, exterior wood or metal surfaces.

Intended Use: For marine use, new wood, old wood, or metal surfaces.

 PHYSICAL CHARACTERISTICS

VISCOSITY: 77-83 k.u.

DRY TO TOUCH: 1 hour

WEIGHT SOLIDS: 71-74%

TACK FREE: 4 hours

VOLUME SOLIDS: 53-56%

TIME TO RECOAT: 24 hours

WEIGHT PER GALLON: 11.25 lbs. per gal.

DRY HARD: 6 hours

V.O.C.: 350 grams per liter

COLOR RANGE: White and Tints

FLASH POINT: 105 F.

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 450-500 square feet per gallon depending on porosity of surface.

SURFACE PREPARATION: Clean all surfaces of oil, dirt, grease, wax or foreign materials New Wood: Prime with Farwest #710 White Linseed Oil Primer. Old Wood: Clean off dirt and dust with wire brush. Spot any bare spots with Farwest #710 White Linseed Oil Primer. Metal: Prime with Farwest X-1184 Red Oxide Primer.

APPLICATION: Brush, roller, or spray.

THINNING: Thin if necessary with Farwest #602 Mineral Spirits.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.