FARWEST PAINT PRODUCT INFORMATION

Primers & Pre-Treatment Coatings

X-4576 Red Oxide Primer

COLOR(S):Red Oxide.

PRODUCT TYPE: Red Oxide Primer.

DESCRIPTION: A soya alkyd red oxide primer for use on structural steel surfaces where durability combined with a fast dry condition is necessary.

Intended Use: For structural steel surfaces.

PHYSICAL CHARACTERISTICS

VISCOSITY: 65-70 k.u.

DRY TO TOUCH: 30 minutes

WEIGHT SOLIDS: 62-65%

TACK FREE: 1 hour

VOLUME SOLIDS: 39-42%

TIME TO RECOAT: 2 hours

WEIGHT PER GALLON: 10.70 lbs. per gal.

DRY HARD: 4 hours

V.O.C.: 450 grams per liter

COLOR RANGE: Red Oxide

FLASH POINT: 25° F.

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 325 square feet per gallon @ approximately 2.0 mils dry.

SURFACE PREPARATION: Surface to be coated must be free of all dirt, oil and grease. Galvanized surfaces should be etched with a phosphoric etch before applying primer. Remove loose rust and scale from metal surfaces with Farwest #695 Rynolite Chemical Cleaner-Etcher.

APPLICATION: Brush, roller, or spray.

THINNING: Thin if necessary with Farwest #605 Synthetic Thinner.

CLEAN-UP: Equipment and tools may be cleaned with Farwest #605 Synthetic Thinner or Farwest #615 Wash Thinner.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.