FARWEST PAINT PRODUCT INFORMATION

Epoxy Coatings

X-5120 Mono-Epoxy Semi-Gloss

COLOR(S): Wide Range of Colors.

PRODUCT TYPE: Epoxy Ester.

DESCRIPTION: A single component epoxy recommended for use on floors and as a maintenance coating as a primer and finish coat. It provides toughness, excellent adhesion and is abrasion-resistant and corrosion resistant.

Intended Use: For floors or a maintenance coating primer or finish coat.

PHYSICAL CHARACTERISTICS

VISCOSITY: 55-60 k.u.

DRY TO TOUCH: 1-2 hours

WEIGHT SOLIDS: 34-36%

TACK FREE: 6-8 hours

VOLUME SOLIDS: 29-31%

TIME TO RECOAT: 24 hours

WEIGHT PER GALLON: 7.20 lbs. per gal.

DRY HARD: 8 hours

V.O.C.: 550 grams per liter

COLOR RANGE: Wide Range of Colors

FLASH POINT: 105 F.

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 300-500 square feet per gallon depending upon surface to be coated.

SURFACE PREPARATION: Surface to be painted must be free of all dirt, grease and foreign material and properly prepared. Galvanized Pipe: Should be etched with Farwest #695 Rynolite Chemical Cleaner-Etcher according to directions and then primed with a coat of Farwest #1029 Rynolite Etching Primer.

APPLICATION: Brush, roller, or spray.

THINNING: Thin if necessary with Farwest #602 Mineral Spirits.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.