FARWEST PAINT PRODUCT INFORMATION

Primers & Pre-Treatment Coatings

X-5672 Plastic Lacquer Proof Primer (Auto)

COLOR(S): White or Gray.

PRODUCT TYPE: Flat Alkyd Modified Lacquer

DESCRIPTION: This is a high-grade protective primer designed especially for application to iron or steel where easy sanding is a must. It sands easily to a glass-like smoothness. This product is lacquer proof therefore a lacquer finish coat may be applied over it without lifting.

Intended Use: For priming iron or steel where sandability is important.

PHYSICAL CHARACTERISTICS

VISCOSITY: 65 k.u.

DRY TO TOUCH: 30 minutes

WEIGHT SOLIDS: 41-43%

TACK FREE: 1 hour

VOLUME SOLIDS: 23-25%

TIME TO RECOAT: 1 hour

WEIGHT PER GALLON: 9.40 lbs. per gal.

DRY HARD: 2 hours

V.O.C.: 643 grams per liter

COLOR RANGE: White or Gray

FLASH POINT: 50 F

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 275-300 square feet per gallon @ 2 mils dry film thickness

SURFACE PREPARATION: Surface must be dry, clean, and free of all foreign agents and properly prepared. Remove loose rust and scale with Farwest #695 Rynolite Chemical Cleaner-Etcher.

APPLICATION: Spray application is recommended for best results.

THINNING: For spray application use Farwest #610 Lacquer Thinner.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #610 Lacquer Thinner or Farwest #615 Wash Thinner.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.