FARWEST PAINT PRODUCT INFORMATION

Specialty Products

#600 Weatherguard UV Deck Stain & Protectant

COLOR(S): Amber.

PRODUCT TYPE: Modified Alkyd Linseed Oil.

DESCRIPTION: Farwest #600 Weatherguard UV Deck Stain & Protectant is formulated to seal out moisture, resist mildew growth and protect against the suns rays with a special UV inhibitor.

Intended Use: Use on wood decks, fences, siding and weathered pressure-treated wood. It is not intended for use over previously painted surfaces.

PHYSICAL CHARACTERISTICS

VISCOSITY: 11" (FORD #4 Cup)

DRY TO TOUCH: 12 hours

WEIGHT SOLIDS: 16-17%

TACK FREE: Overnight

VOLUME SOLIDS: 13-14%

TIME TO RECOAT: Overnight

WEIGHT PER GALLON: 7 lbs. per gal.

DRY HARD: Overnight

V.O.C.: 650 grams per liter

COLOR RANGE: Clear

FLASH POINT: 105 F.

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 300-400 square feet per gallon depending on porosity of surface.

SURFACE PREPARATION: Surface to be coated must be dry, free of all dirt, oil or grease, mold and mildew. Use a good deck cleaner to ensure surface is prepared properly prior to application of Farwest #600 Weatherguard UV Deck Stain & Protectant.

APPLICATION: Brush, roller, or spray. Apply an even coat and avoid puddling. If puddles do occur, roll or brush out area immediately.

THINNING: Ready to use. Do not thin.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.