FARWEST PAINT PRODUCT INFORMATION
Waterborne Industrial Coatings
#6200 Series Aqua-Shield Gloss Waterborne Enamel
(#6200 Gloss White/#6235 Neutral Base)
COLOR(S): White and Tints.
PRODUCT TYPE: Waterborne Gloss Equipment Enamel.
DESCRIPTION: This product was developed utilizing the latest in waterborne technology to provide a durable interior or exterior equipment enamel with a superior gloss finish. It is a high quality finish that will provide the user with years of service.
Intended Use: Finish gloss enamel for interior or exterior equipment.
VISCOSITY: 70-75 k.u.
DRY TO TOUCH: 30-45 minutes
WEIGHT SOLIDS: 42-44%
TACK FREE: 5-6 hours
VOLUME SOLIDS: 29-31%
TIME TO RECOAT: when set/up to 3 hours after*
WEIGHT PER GALLON: 9.70 lbs. per gal.
DRY HARD: 8 hours
V.O.C.: 209 grams per liter
COLOR RANGE: White and Tints
FLASH POINT: N/A
PACKAGING:1 or 5 gallon containers
PRACTICAL COVERAGE: 200-300 square feet per gallon.
* If the safe time limit has been exceeded for recoating, it is advisable to wait until the film is cured hard before recoating.
SURFACE PREPARATION: Apply only to a properly cleaned and prepared surface. Surface must be free of dirt, grease, oil, and loose paints or scale. Surface must be dry. Do not apply to surfaces when surface temperature is below 45° F.
APPLICATION: This product was specifically developed for application over prepared or primed metal surfaces. For other types of applications consult a Farwest Paint sales representative. It is recommended to use Farwest X-5958 Aqua-Shield Red Oxide Primer as an undercoat. Apply by brush, roller, airless spray or conventional air gun.
THINNING: Thin if necessary with clean regular tap water. TO (VISCOSITY): Full body for airless or up to 1 quart to 5 gallons for conventional spray, reduce to 25-30" on a Zahn #2 Cup. Do not, under any circumstances, use solvent to thin this product.
CLEAN-UP: Clean up with warm soap and water as soon as possible. Product develops rapid resistance to water, therefore if cleaning is delayed, clean up may be accomplished by use of Farwest #602 Mineral Spirits or Farwest #610 Lacquer Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.