FARWEST PAINT PRODUCT INFORMATION
Primers & Pre-Treatment Coatings
X-6316 Red Weldable Primer
PRODUCT TYPE: Phenolic Modified Alkyd.
DESCRIPTION: A weldable, fast-drying, rust-inhibitive primer. This product contains no lead or chromate. It is lacquer-proof and may be used as an undercoat for two-component urethanes and epoxies. Farwest Weldable Primer offers the same high quality as Farwest X-4959 & X-4985 Primers with the added feature of minimum burn back on welds..
Intended Use: For iron, steel, or wood surfaces.
VISCOSITY: 55-60 k.u.
DRY TO TOUCH: 5 minutes
WEIGHT SOLIDS: 43-47%
TACK FREE: 1 hour
VOLUME SOLIDS: 27-31%
TIME TO RECOAT: 2-4 hours
WEIGHT PER GALLON: 9.00 lbs. per gal.
DRY HARD: 2 hours
V.O.C.: 595 grams per liter
COLOR RANGE: Red
FLASH POINT: 45° F.
PACKAGING: 1 or 5 gallon containers
BATCH: 25 gallons minimum
PRACTICAL COVERAGE: 350 square feet per gallon.
SURFACE PREPARATION: Surface must be dust and dirt free. Clean by using solvent degreaser or light sandblasting if necessary. Remove loose rust and scale with Farwest #695 Rynolite Chemical Cleaner-Etcher and wire brush.
APPLICATION: Apply at 1 to 1.25 mils dry by airlesss or conventional spray.
THINNING: Not usually needed but thin if necessary with Farwest #605 Synthetic Thinner or Farwest Toluol.
CLEAN-UP:Equipment and tools may be cleaned with Farwest #605 Synthetic Thinner or Farwest #610 Lacquer Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.