FARWEST PAINT PRODUCT INFORMATION
Primers & Pre-Treatment Coatings
X-6748 Red Lead Replacement Primer
PRODUCT TYPE: Rust-inhibitive Primer.
DESCRIPTION: A high-quality rust-inhibitive metal primer for structural steel and general maintenance use. Will tolerate light rust on a surface and provide excellent adhesion to a prepared surface.
Intended Use: Bond coat for structural steel and other ferrous metal surfaces, marine industry as a primer for wood or metal surfaces, a marine caulking for wood.
VISCOSITY: 75-80 k.u.
DRY TO TOUCH: 1 hour
WEIGHT SOLIDS: 70-72%
TACK FREE: 4 hours
VOLUME SOLIDS: 45-47%
TIME TO RECOAT: 24 hours
WEIGHT PER GALLON: 12.60 lbs. per gal.
DRY HARD: 4 hours
V.O.C.: 432 grams per liter
FLASH POINT: 103° F.
PACKAGING: 1 quart, 1 or 5 gallon containers
PRACTICAL COVERAGE: Approximately 300-400 square feet per gallon at 2.0 mils dry film thickness.
SURFACE PREPARATION: Metal surfaces must be cleaned free of dirt, dust, chemical deposits, heavy mill scale, rust, grease, oil, wax or other foreign substances including oil paint in poor condition. Scraping, sanding, wire-brushing, grinding, chipping or sandblasting may be required. Remove oil and grease with solvents such as mineral spirits or xylol in compliance with SSPC-SP1-63 Solvent Cleaning.
APPLICATION: Brush, roller, airless or conventional spray.
THINNING: Thin if necessary with Farwest #602 Mineral Spirits.
CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits or Farwest #605 Synthetic Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.