FARWEST PAINT PRODUCT INFORMATION

Concrete Sealers

X-6754 Agri-Sheen Gloss Concrete Sealer

COLOR(S): Clear.

PRODUCT TYPE: Solvent-Based Acrylic Gloss Penetrating Sealer.

DESCRIPTION: A gloss penetrating sealer for application on interior or exterior surfaces including concrete, brick, masonry, aggregate panels, cast-in-place concrete, terrazo or ceramic tile surfaces. Dries to a beautiful glossy finish.

Intended Use: Sealer for concrete, brick, masonry, terrazo or ceramic tile.

PHYSICAL CHARACTERISTICS

VISCOSITY: 14"-16" (Ford 4)

DRY TO TOUCH: 30 minutes

WEIGHT SOLIDS: 21-23%

TACK FREE: 1 hour

VOLUME SOLIDS: 17-19%

TIME TO RECOAT: 2-3 hours

WEIGHT PER GALLON: 7.50 lbs. per gal.

DRY HARD: 2 hours

V.O.C.: 671 grams per liter

COLOR RANGE: Clear

FLASH POINT: 50° F.

PACKAGING: 1 or 5 gallons, 55 gal. drums

BATCH: Stock

PRACTICAL COVERAGE: 300-400 square feet per gallon depending on porosity of surface.

SURFACE PREPARATION: Surface to be coated must be clean, dry, free of dust, oil, grease and all form release agents, retarders or curing compounds.

APPLICATION: Apply by brush or roller in a thin, even coat. Two coats are recommended. Concrete or aggregate must be checked for moisture content prior to application: Moisture content must be no higher than 4-6%. (Excessive moisture will cause a whiting effect.)

THINNING: Thin if necessary with Farwest Toluol.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #605 Synthetic Thinner, Farwest #610 Lacquer Thinner, or Farwest #615 Wash Thinner.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.