FARWEST PAINT PRODUCT INFORMATION

Primers & Pre-Treatment Coatings

X-6791 AquaShield II Fast-Dry Shop Primer

COLOR(S): Gray (#26373).

PRODUCT TYPE: Waterborne Rust-Inhibitive Primer.

DESCRIPTION: AquaShield II Primer was developed from the latest in waterborne technology to provide water resistant and corrosion resistant film when used over metal surfaces. Due to its unique formulation, this material will not cause flash rusting to steel, and is faster drying than many waterborne systems. This is a high quality protective finish which meets or exceeds the quality of many conventional solvent borne systems. Due to recent legislation limiting use of solvent containing materials and local fire department jurisdictions limiting the use of flammable materials, this product is an excellent alternative to using a solvent-borne system.

Intended Use: Waterborne protective coating for metal surfaces.

PHYSICAL CHARACTERISTICS

VISCOSITY: 70-75 k.u.

DRY TO TOUCH: 30-45 minutes

WEIGHT SOLIDS: 50-52%

TACK FREE: 1 hour

VOLUME SOLIDS: 37-39%

TIME TO RECOAT: < 1 hour > 3 hours*

WEIGHT PER GALLON: 10.6 lbs. per gal.

DRY HARD: 3 hours

V.O.C.: 76 grams per liter

COLOR RANGE: Gray

FLASH POINT: N/A

PACKAGING: Stock Item

BATCH: 25 gallons (minimum)

PRACTICAL COVERAGE: Approximately 300-400 square feet per gallon depending upon film thickness and substrate porosity. * If the safe time limit has been exceeded for recoating, it is advisable to wait until the film is cured hard before recoating.

SURFACE PREPARATION: Apply only to properly cleaned and prepared surfaces. Surface must be dry, free of dirt, grease, oil and loose paint or scale. Do not apply when the surface temperature is below 40 F.

APPLICATION: Brush, roller, airless spray or conventional air gun.

THINNING: No thinning is required. Clean tap water if necessary. Full body for airless or up to 10% for conventional spray. Do not under any circumstances use solvent to thin this product! Do not store in temperatures below 32 F. KEEP FROM FREEZING.

CLEAN-UP: Clean up with water as soon as possible. Product develops rapid resistance to water, therefore if cleaning is delayed, tools and equipment may be cleaned with Farwest #602 Mineral Spirits or Farwest #610 Lacquer Thinner.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.