FARWEST PAINT PRODUCT INFORMATION

Primers & Pre-Treatment Coatings

#710 White Linseed Oil Primer (Exterior)

COLOR(S): White (may be tinted).

PRODUCT TYPE: 100% Pure Linseed Oil Base Primer Paint.

DESCRIPTION: A top quality exterior primer designed to prime and seal new wood surfaces and weathered painted surfaces. It is a controlled penetrating primer made from pure linseed oil combined with pure pigments. It is an ideal foundation for oil and latex finish coats.

Intended Use: All exterior wood surfaces.

PHYSICAL CHARACTERISTICS

VISCOSITY: 84 k.u.

DRY TO TOUCH: 1 hour

WEIGHT SOLIDS: 82-86%

TACK FREE: 8 hours

VOLUME SOLIDS: 68-70%

TIME TO RECOAT: Overnight

WEIGHT PER GALLON: 13.72 lbs. per gal.

DRY HARD: 18 hours

V.O.C.: 244 grams per liter

COLOR RANGE: White (may be tinted)

FLASH POINT: 105 F.

PACKAGING: 1 or 5 gallon

BATCH: Stock

PRACTICAL COVERAGE: 300-500 square feet per gallon depending on the type of surface to be coated.

SURFACE PREPARATION:Surface must be dry, clean and free of all foreign agents and properly prepared.

APPLICATION: Brush, roller or airless spray.

THINNING:Thin if necessary with Farwest #602 Mineral Spirits.

CLEAN-UP:Tools and equipment may be cleaned with Farwest #602 Mineral Spirits.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.