Interior Finish Coatings

#922 Series ProLine Semi-Gloss Latex (Interior)

(#922 White/#925 Deep Base/#955 Ultra Deep Base/#958 Clear Base)

COLOR(S): White and Tints.

PRODUCT TYPE: Pigmented Modified Acrylic Latex Semi-Gloss Enamel.

DESCRIPTION: An acrylic base latex for interior walls, millwork, and trim. It is a self-sealing, high-hiding latex with excellent washability.

Intended Use: For interior walls, millwork, or trim.


VISCOSITY: 88-92 k.u.

DRY TO TOUCH: 30 minutes


TACK FREE: 4 hours


TIME TO RECOAT: 4-6 hours

WEIGHT PER GALLON: 9.10-10.40 lbs. per gal.

DRY HARD: 18 hours

V.O.C.: 87-97 grams per liter

COLOR RANGE: White and Tints


PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 250-450 square feet per gallon depending on the surface.

SURFACE PREPARATION: Surface must be clean, free of dirt, loose scales, oils and grease. All cracks, holes and surface imperfections should be filled with spackling compound. Glossy surfaces should be de-glossed with Farwest #644 Gloss Set. If coating over new wallboard, seal the surface with Farwest #970 PVA Primer Sealer.

APPLICATION: Brush, roller, or spray. A good quality nylon bristle brush provides the best results. Brushing trim and under eaves is recommended for a quality job.

THINNING: Thinning is not usually required. If necessary, such as for airless spray application, use regular clean tap water.

CLEAN-UP: Clean all tools and equipment as soon as possible with water. Partially dried paint is easier to remove with warm, soapy water.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.