FARWEST PAINT PRODUCT INFORMATION
Interior Finish Coatings
#950 ProLine Vinyl Acrylic Flat Latex (Interior)
COLOR(S): White and Tints.
PRODUCT TYPE: Pigmented Interior Flat Wall Paint.
DESCRIPTION: A one-coat ultra flat latex for spray, brush or roller application on walls and ceilings. It exhibits excellent wet and dry hiding qualities.
Intended Use: For interior walls and ceilings
VISCOSITY: 100 k.u.
DRY TO TOUCH: 30 minutes
WEIGHT SOLIDS: 49-51%
TACK FREE: 1 hour
VOLUME SOLIDS: 29-31%
TIME TO RECOAT: 2-4 hours
WEIGHT PER GALLON: 11.60 lbs. per gallon
DRY HARD: 4 hours
V.O.C.: 59 grams per liter
COLOR RANGE: White and Tints
FLASH POINT: N/A
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: 300-500 square feet per gallon depending upon surface to be coated.
SURFACE PREPARATION: Remove all loose paint, dirt, scale and grease. Fill cracks, holes and imperfections with spackling compound. Spot patches with the paint before painting the entire wall surface. Gloss surfaces should be treated with Farwest #644 Gloss-Set before application of paint. When coating new wallboard it is recommended to seal the surface with a quality sealer such as Farwest #970 Poroseal PVA Primer-Sealer.
APPLICATION: Brush, roller, or spray. When brushing, use a wide brush; keep it full and avoid re-brushing if possible.
THINNING:For Spray Application: Thin only as necessary to provide spray pattern without runs or sags with regular clean tap water only.
CLEAN-UP:Clean tools and equipment with warm water. Warm, soapy water will do a better cleaning job than cold tap water. Wipe up spattered paint with a damp cloth.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.