FARWEST PAINT PRODUCT INFORMATION
Exterior Finish Coatings
#975 Pli-Krete S-5 Synthetic Rubber Base Paint
(#975 White/#974 Clear)
COLOR(S): White, Clear and Tints.
PRODUCT TYPE: Synthetic Solvent Rubber Base Flat.
DESCRIPTION: It is a synthetic rubber-base paint for all exterior masonry and stucco surfaces. It gives a finish of exceptional durability and weathering properties. Dries to an attractive flat finish that is completely free from lapping, ghosting, flashing and other color and sheen variations. It is a breathing type film that allows interior moisture to escape. Allows outstanding adhesion and provides exceptional blister and peeling resistance.
Intended Use: For poured concrete, concrete block, cinder block, cement finish block, cement asbestos shingles and board, stucco, plaster, or brick. May be used on the above surfaces whether they are unpainted or previously coated with cement water paints, oil paints, or latex paints.
VISCOSITY: 75-80 k.u.
DRY TO TOUCH: 1/2-1 hour
WEIGHT SOLIDS: 57-59% `
TACK FREE: 2 hours
VOLUME SOLIDS: 32-34%
TIME TO RECOAT: Overnight
WEIGHT PER GALLON: 11.69 lbs. per gal.
DRY HARD: Overnight
V.O.C.: 491 grams per liter
COLOR RANGE: White, Clear and Tints
FLASH POINT: 90° F.
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: 300-400 square feet per gallon depending upon surface porosity.
SURFACE PREPARATION: Surface to be coated must be free of all dirt, oil and grease as well as any other foreign material.
APPLICATION: Brush, roller, or spray.
THINNING: Thin if necessary with Farwest #608 Pli-Krete Thinner or Farwest #605 Synthetic Thinner.
CLEAN-UP: Tools and equipment may be cleaned with Farwest #608 Pli-Krete Thinner or Farwest #605 Synthetic Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.