FARWEST PAINT PRODUCT INFORMATION
Industrial Finish Coatings
#990 Chloro-Rubber Gloss Enamel
(#990 White/#999 Clear)
COLOR(S): Whites and Tints.
PRODUCT TYPE: Chlorinated Rubber/Acid & Alkali Resistant.
DESCRIPTION: An acid and alkali-resistant gloss rubber enamel for use on concrete, masonry, or steel surfaces. It is excellent for concrete or steel swimming pools and as an equipment enamel for heavy duty machinery or parts. This product features a combination of hardness and flexibility and has excellent resistance to many acids, alkalis and water.
Intended Use: For marine areas, steel surfaces, heavy duty equipment, parts, masonry or concrete.
VISCOSITY: 70 k.u.
DRY TO TOUCH: 15-45 minutes
WEIGHT SOLIDS: 43-56% depending on color*
TACK FREE: 1 hours
VOLUME SOLIDS: 35-39% depending on color*
TIME TO RECOAT: 24 hours
WEIGHT PER GALLON: 8.50-10.20 lbs. per gal.
DRY HARD: 3 hours
V.O.C.: 477 grams per liter
COLOR RANGE: Whites and Tints
FLASH POINT: 80° F.
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: 300-500 square feet per gallon depending on application and surface to be coated.
* Contact Farwest Paint for specific weight solids and volume solids % for individual colors.
SURFACE PREPARATION: Surface to be coated must be free of all dirt, grease and oil to insure proper paint adhesion. New Steel & Concrete: Should be etched with Farwest #695 Rynolite Chemical Cleaner-Etcher.
APPLICATION: Brush, roller, or spray.
THINNING: Thin if necessary with Farwest #605 Synthetic Thinner.
CLEAN-UP: Tools and equipment may be cleaned with Farwest #605 Synthetic Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.