FARWEST PAINT PRODUCT INFORMATION
A-A-1788 Interior Floor Varnish
PRODUCT TYPE: Air Drying Oil Modified Alkyd Varnish.
Intended Use: Interior varnish for floor and trim.
VISCOSITY: 30- 55"(FORD #4) DRY TO TOUCH: 2 hours
WEIGHT SOLIDS: 44-47%
VOLUME SOLIDS: 38-40% TIME TO RECOAT: 24 hours
WEIGHT PER GALLON: 7.61 lbs. per gal. DRY HARD: 8 hours
V.O.C.: 485 grams per liter COLOR RANGE: Clear
FLASH POINT: 105° F. PACKAGING: Qt., 1 or 5 gallon containers
BATCH: To Order
PRACTICAL COVERAGE: 400-600 square feet per gallon.
SURFACE PREPARATION: All surfaces to be coated must be thoroughly cleaned and free of dirt, waxes and oily residues. It is recommended for hardwood floors that the floor be sanded smooth and coated with suitable wood sealer, such as Farwests Matson X-5099 Lacquer Sanding Sealer, before applying the finish coat. When the surface has been stained with an oil wiping stain, best results are experienced if the sealer and finish are applied only after the stain is thoroughly dry. In most cases, an overnight dry is suitable.
APPLICATION: This material is best applied to wood millwork by means of conventional spray equipment but may be brushed with a fine china bristle brush. For floors, the use of a bristle brush applicator will provide good results.
THINNING: Thin if necessary with Farwest #602 Mineral Spirits or Farwest #605 Synthetic Thinner.
CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits or Farwest #615 Wash Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.