FARWEST PAINT PRODUCT INFORMATION
Government Spec.-Type Coatings
TT-C-530 Red Oxide Primer
COLOR(S): Red Oxide.
PRODUCT TYPE: Rust-Inhibiting Rust Oxide Primer.
DESCRIPTION: A fast-setting rust-inhibiting primer that is based on a ferric oxide anti-corrosion system. This product binds rust to metal and seals out rust-causing air and water.
Intended Use: Rust-inhibiting primer for new or rusted metal.
VISCOSITY: 60-78 k.u.
DRY TO TOUCH: 2 hours
WEIGHT SOLIDS: 74-76%
TACK FREE: Approximately 6 hours
VOLUME SOLIDS: 55-57%
TIME TO RECOAT: 6 hours
WEIGHT PER GALLON: 12.00 lbs. per gal.
DRY HARD: 24 hours
V.O.C.: 329 grams/liter
COLOR RANGE: Red
FLASH POINT: 104° F.
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: Approximately 300-400 square feet per gallon at 2 mils dry film thickness.
SURFACE PREPARATION: Remove loose rust with Farwest #695 Rynolite Chemical Cleaner-Etcher and wire brush. Surface should be free of any contaminants.
APPLICATION: Brush, roller, or spray. Stir thoroughly.
THINNING: Product should not be thinned unless absolutely necessary. Thin, if necessary, with Farwest #602 Mineral Spirits or Farwest #605 Synthetic Thinner.
CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits or Farwest #605 Synthetic Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.