FARWEST PAINT PRODUCT INFORMATION
Government Spec.-Type Coatings
TT-E-545C (A-A-2994) Enamel Undercoat (Interior)
(Commercial Equivalent TT-E-545C/A-A-2994))
COLOR(S): White (may be tinted).
PRODUCT TYPE: Flat Alkyd Sealer/Undercoat.
DESCRIPTION: It is a dense, high hiding full-bodied primer for interior use on wood, wallboard, etc. when a semi-glass or high gloss finish is to be used. It is easy to brush, levels well and has excellent sealing and sanding qualities.
Intended Use: For sealing interior wallboard, cement block, wood, or plaster before application of latex or alkyd base enamel.
VISCOSITY: 83 k.u
DRY TO TOUCH: 1/2 -1 hour
WEIGHT SOLIDS: 70-73%
TACK FREE: 6-8 hours
VOLUME SOLIDS: 46-48%
TIME TO RECOAT: 8-12 hours
WEIGHT PER GALLON: 12.20 lbs. per gal.
DRY HARD: 18 hours
V.O.C.: 411 grams per liter
COLOR RANGE: White (may be tinted)
FLASH POINT: 105° F.
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: 350-450 square feet per gallon depending on the porosity of the surface to be coated.
SURFACE PREPARATION: Surface must be dry, clean and free of all foreign agents and properly prepared.
APPLICATION: Apply by brush, roller or airless spray, making certain that the surface is well sealed. Usually only one coat is required to provide adequate sealing. Allow to dry, then recoat with the desired,Farwest interior paints.
THINNING: Thin if necessary with Farwest #602 Mineral Spirits.
CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.