FARWEST PAINT PRODUCT INFORMATION
Government Spec.-Type Coatings
TT-P-102F (A-A-3057) Alkyd Semi-Gloss Enamel
(Commercial Equivalent TT-P-102F/A-A-3057)
COLOR(S): White and Tints.
PRODUCT TYPE: Pigmented Semi-Gloss Alkyd Enamel.
DESCRIPTION: A versatile top quality alkyd enamel. It is a durable, washable finish for bathroom and kitchen walls, millwork, cabinets, trim and furniture. Outside it may be used for sash, body, trim, gutters, etc. where a high gloss is not desired. It will not absorb dirt and is easily washed with any good detergent or paint cleaner. As a marine enamel, it may be used on hulls and topside. It covers exceptionally well and does not show shiners or flat spots.
Intended Use: For bathroom or kitchen walls, millwork, cabinets, trim, furniture, sash, body, trim, gutters, or as a marine enamel.
VISCOSITY: 84 k.u.
DRY TO TOUCH: 2 hours
WEIGHT SOLIDS: 71-74%
TACK FREE: 5-6 hours
VOLUME SOLIDS: 53-59%
TIME TO RECOAT: Overnight
WEIGHT PER GALLON: 10.10-11.30 lbs. per gal.
DRY HARD: 8 hours
V.O.C.: 330 grams per liter
COLOR RANGE: White and Tints
FLASH POINT: 105° F.
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: 300-600 square feet per gallon depending on surface to be coated and application.
SURFACE PREPARATION: Surface must be clean, dry, properly prepared and free of all foreign agents and loose particles. Previously-painted glossy surfaces should be dulled with sandpaper or Farwest #644 Gloss Set (liquid sandpaper). A coat of Farwest #721 Enamel Undercoat for woodwork is recommended, but if the surface is in good condition, one coat of semi-gloss gives satisfactory results. NEW WOODWORK, FURNITURE OR CABINETS: Putty all holes or deflections and sand lightly; then apply one coat of Farwest #721 Enamel Undercoat. When completely dry, apply the finish coat. FOR PLASTER: Apply one coat of Farwest #706 E-Z Seal Wall Sealer. FOR NEW WALLBOARD: Prime with Farwest #970 Poroseal PVA Primer Sealer. Apply after primer is thoroughly dry.
APPLICATION: Apply by either brush or roller.
THINNING: Thinning is not recommended but, if necessary, thin with Farwest #602 Mineral Spirits.
CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.