FARWEST PAINT PRODUCT INFORMATION
Government Spec.-Type Coatings
TT-P-1952D "Fast Dry" Acrylic Latex Traffic Paint
COLOR(S): White, Yellow, Black, Red.
PRODUCT TYPE: Acrylic Marking Paint.
DESCRIPTION: This product is designed to meet the United States Government/General Services Administration Specification for TT-P-1952D Traffic Line Coating. It is a ready-mixed paint for marking airfields and other traffic-bearing surfaces, such as Portland cement concrete, bituminous cement concrete, asphalt, tar; may be used alone or to bind reflective beads.
Intended Use: For marking pavement, airfields, or traffic-bearing surfaces.
VISCOSITY: 80-90 k.u.
DRY TO TOUCH: 15 minutes
WEIGHT SOLIDS: 76-77%
TACK FREE: 30 minutes
VOLUME SOLIDS: 60-61%
TIME TO RECOAT: 1 hour
WEIGHT PER GALLON: 13.60-14.00 lbs. per gal.
DRY HARD: 1 hour
V.O.C.: 93 grams per liter
COLOR RANGE: White,Yellow, Black, Red.
FLASH POINT: N/A
PACKAGING: 5 gal. containers, 55 gal. drums
PRACTICAL COVERAGE: 300 square feet per gallon depending on porosity of surface.
SURFACE PREPARATION: FOR PAVEMENT OR CONCRETE SURFACES: Sweep or dust away all loose rock and gravel for best results. Previously striped surfaces must be free of all loose and peeling coating. It is recommended that the surface be as dry as possible. Too wet of a surface may result in the coating running, sagging, inability to dry, and loss of adhesion to the substrate. Do not apply when temperature is below 45° F.
APPLICATION: For best striping results, it is best to use a motorized airless striping machine equipped with a nozzle designed for use with latex coatings. Follow equipment manufacturers recommendations for proper operation of the equipment. FOR SMALL JOBS: This material may be brushed or rolled with a long nap roller. Some thinning may be necessary for good flow and brushability.
THINNING: Thin with regular clean tap water only as necessary.
CLEAN-UP: Tools and equipment may be cleaned with regular tap water. If paint has dried, use Farwest #615 Wash Lacquer Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.