FARWEST PAINT PRODUCT INFORMATION
Government Spec.-Type Coatings
TT-P-641G (Type II) Zinc Dust Primer
PRODUCT TYPE: Phenolic Modified Zinc Dust Zinc Oxide Primer.
DESCRIPTION: A Zinc Dust-Zinc Oxide Phenolic Varnish Coating for use on steel or galvanized surfaces. It has good rust-inhibitive characteristics with excellent durability and may be used for intermediate and finish coats. This is a 2 Part System . Part A contains the vehicle portion. Part B contains the dry zinc dust and zinc oxide pigment.
Intended Use: On steel or galvanized surfaces.
VISCOSITY: 72-92 k.u. (mixed)
DRY TO TOUCH: 1-2 hours
WEIGHT SOLIDS: 86-88%
TACK FREE: 1-4 hours
VOLUME SOLIDS: 64-66%
TIME TO RECOAT: 24 hours
WEIGHT PER GALLON: 21 lbs. per gal.
DRY HARD: 18 hours
V.O.C.: 277 grams per liter
COLOR RANGE: Gray
FLASH POINT: 105° F.
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: 480 square feet per gallon @ 2 mils dry film thickness.
SURFACE PREPARATION: Surface to be coated must be free of all rust, dirt, oil and grease for best results. Remove loose rust and scale with Farwest #695 Rynolite Chemical Cleaner-Etcher.
APPLICATION: Brush, roller, or spray.
THINNING: Thin if necessary with Farwest #602 Mineral Spirits.
CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.