FARWEST PAINT PRODUCT INFORMATION
Government Spec.-Type Coatings
TT-P-664C Lacquer-Resisting Primer
(Commercial Equivalent TT-P-664C)
COLOR(S): Red Oxide.
PRODUCT TYPE: Phenolic Modified Alkyd Primer.
DESCRIPTION: A high grade phenolic modified alkyd type rust-inhibiting, lacquer-resisting primer for application on iron, steel, or wood. This product features a combination of properties including fast drying , good adhesion (over properly prepared surfaces), and good protection against rusting. It is a lacquer proof primer and finish coats such as nitrocellulose lacquers may be applied directly over it without lifting or wrinkling.
Intended Use: For iron, steel, or wood surfaces.
VISCOSITY: 55-60 k.u.
DRY TO TOUCH: 30 minutes
WEIGHT SOLIDS: 48-50%
TACK FREE: 1 hour
VOLUME SOLIDS: 33-35%
TIME TO RECOAT: 1 hour
WEIGHT PER GALLON: 9.40 lbs. per gal.
DRY HARD: 2 hours
V.O.C.: 563 grams per liter
COLOR RANGE: Red Oxide
FLASH POINT: 50° F.
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: 300 square feet per gallon @ 2 mils dry film thickness.
SURFACE PREPARATION: Remove loose rust and scale with Farwest #695 Rynolite Chemical Cleaner-Etcher and wire brush. All surfaces should be free of foreign particles and contaminants.
APPLICATION: Spray application is recommended for best results. For conventional spray: thin to 20-24" Zahn #2 Cup.
THINNING: This product should not be thinned unless absolutely necessary. If necessary for even spraying, thin with Farwest #605 Synthetic Thinner.
CLEAN-UP: Tools and equipment may be cleaned with Farwest #605 Synthetic Thinner or Farwest #615 Wash Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.