FARWEST PAINT PRODUCT INFORMATION
Government Spec.-Type Coatings
TT-P-85E Zone Marking Coating (Alkyd)
(#1070 White/#1071 Yellow/#1072 Red/#1073 Black/#1074 Blue)
COLOR(S): White, Black, Yellow, Red, Blue.
PRODUCT TYPE: Fast-Dry Flat Alkyd.
DESCRIPTION: A fast-drying zone marking coating designed for use in high traffic areas on concrete, asphalt, or brick surfaces. It may also be used on interior surfaces of concrete, wood, or metal with the proper surface preparation and/or surface treatment. This product is excellent in areas where durability, fast dry and ease of application are desired.
Intended Use: For exterior concrete, asphalt, or brick and interior concrete, wood, or metal.
VISCOSITY: 70-75 k.u.
DRY TO TOUCH: 15 minutes
WEIGHT SOLIDS: 62-75%
TACK FREE: 30 minutes
VOLUME SOLIDS: 40-53%
TIME TO RECOAT: 1 hour
WEIGHT PER GALLON: 10.2-12.5 lbs. per gal.
DRYING TIME: (no pick up) 30 minutes
V.O.C.: 450 grams per liter
COLOR RANGE: white, black, yellow, red, blue
FLASH POINT: 50° F.
PACKAGING: 1 or 5 gallons, 55 gal. drums.
PRACTICAL COVERAGE: 300 square feet per gallon depending on the surface to be coated.
SURFACE PREPARATION: FOR PAVEMENT OR CONCRETE SURFACES: Sweep or dust away all loose rock and gravel for best results. Previously striped surfaces must be free of all loose and peeling coating. It is recommended that the surface be as dry as possible. Too wet of a surface may result in loss of bonding to the substrate at a later date.
APPLICATION: For best striping results, it is best to use a motorized airless striping machine. Follow equipment manufacturers recommendations for proper operation of the equipment FOR SMALL JOBS: This material can be brushed or rolled with a long nap roller (some thinning may be necessary for good flow and brushability).
THINNING: Usually, no thinning is required. If necessary, thin with Farwest #607 Fast Thinner. Product should not be thinned more than 3%.
CLEAN-UP: Tools and equipment may be cleaned with Farwest #605 Synthetic Thinner, Farwest #607 Fast Thinner, or Farwest #610 Lacquer Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.