FARWEST PAINT PRODUCT INFORMATION
Waterborne Epoxy Coatings
EarthCoat X-7264 2-Component Waterborne Polyamine Epoxy Coating
PRODUCT TYPE: 2-Component Waterborne Epoxy-Polyamine.
DESCRIPTION: Farwest EarthCoat is a premium quality 2-component waterborne epoxy-polyamine designed for use on properly prepared concrete floors. It dries hard in 12 hours to a beautiful satin finish. It has a V.O.C. level of less than 1 gram per liter mixed, which makes it a very environmentally friendly coating.
VISCOSITY: 65-74 k.u. (mixed)
DRY TO TOUCH: 6 Hours
WEIGHT SOLIDS: 74% +/- 2 (mixed)
DRY HARD: 12 hours
VOLUME SOLIDS: 64% +/- 2 (mixed)
TACK FREE: 5 hours
POT LIFE: 3 hour temp. dependent
TIME TO RECOAT: 24 hours
FOOT TRAFFIC: 24 hours
WEIGHT PER GALLON: 11.3 lbs. per gal. (mixed)
V.O.C.: 1 gram per liter (mixed)
VEHICLE TRAFFIC: 48 hours
FLASH POINT: N/A.
PACKAGING: 1 or 5 gallon containers (1 and 4 gallon kits)
PRACTICAL COVERAGE: 250 square feet per gallon @ 3 mils dry film thickness.
SURFACE PREPARATION: New Concrete Floors: Allow concrete to cure for at least thirty (30) days before coating.
Old Concrete Floors: Blast or muriatic acid etch followed by a thorough rinse with fresh water. Allow to dry before applying EarthCoat.
APPLICATION: Roll or brush. This is a two-component system that is mixed just before using. MIX: 3 Volumes Component "A" Base to 1 Volume Component "B" Activator. Induction time of ½ hour should be allowed before application.
THINNING: Not usually required, but thin if necessary with up to one-half pint of clean water per gallon after mixing.
CLEAN-UP: Tools and equipment may be cleaned immediately with soap and water.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.