FARWEST PAINT PRODUCT INFORMATION
Waterborne Industrial Coatings
Aqua-Shield 100% Acrylic Masonry Coating
X-7304 White/X-7306 Neutral Base
COLOR(S): White and Tints.
PRODUCT TYPE: Waterborne Acrylic Masonry Coating.
DESCRIPTION: Aqua-Shield was developed utilizing a water-based, 100% acrylic, self cross-linking nano-polymer emulsion specifically for horizontal masonry surfaces. It is a high quality finish that will provide the user with years of service. Can be applied to damp and "hot" concrete. Can be applied wet on wet. Low VOC and low odor.
Intended Use: Interior or Exterior cementitious surfaces - driveways, sidewalks, patios, pavers, overlays, decorative concrete and garage floors.
VISCOSITY: 70-80 k.u.
WEIGHT SOLIDS: 38%-42%
VOLUME SOLIDS: 26-28%
WEIGHT PER GALLON: 10.30 lbs. per gal.
V.O.C.: 161 grams per liter
FLASH POINT: N/A
DRY TO TOUCH: 30-45 minutes
TACK FREE: 1 hour
TIME TO RECOAT: 1 hour
DRY HARD: 4 hours
COLOR RANGE: White and Tints
PACKAGING: 1 or 5 gallon containers
PRACTICAL COVERAGE: 200-300 square feet per gallon.
SURFACE PREPARATION: Apply only to a properly cleaned and prepared surface. Surface must be free of dirt, grease, oil, and loose paint or scale. Surface may be damp. Do not apply to surfaces when surface temperature is below 45 F.
APPLICATION: This product was specifically developed for application over cementitious surfaces. For other types of applications, consult a Farwest Paint sales representative. Apply by brush, roller, airless sprayer or conventional air gun.
THINNING: Thin if necessary with clean regular tap water. Do not, under any circumstances, use solvent to thin this product.
CLEAN-UP: Clean up with warm soap and water as soon as possible. Product develops rapid resistance to water, therefore if cleaning is delayed, clean up may be accomplished by use of Farwest #610 Lacquer Thinner.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.