Farwest Paint Manufacturing Co.
4522 South 133rd Street
Tukwila, Washington, 98168
http://www.farwestpaint.com
Sections I-IV (This Page) / Sections V-X (Click Here)
Material Safety Data Sheet
For Coatings and Related Materials
Prep: Feb. 1989 Update: Sept. 1997
 
Section I  - Product Identification
24 Hour Emergency Assistance
Emergency (Chemtrec) (800) 424-9300
Information  (Farwest) (206) 244-8844
Product Number: 213

Product Name: Golden Brown Porch & Deck Enamel

Product Class: Pigmented, Modified Alkyd Resin Solution
   Hazard Rating
           0             Lowest
           1                  |
           2                  |
           3                  |
           4           Extreme
This Product
   Health: 2
   Flammability: 1
   Reactivity: 1
   Personal Protection: G

Section II - Hazardous Ingredients
Ingredient Percent (By Weight)

Occupational

TLV (ACGIH)

Exposure

PEL (OSHA)

 Vapor Pressure
Pigments 4-9% N/A N/A N/A
Resin/Vehicle 30-35% 100ppm 500ppm 2.0MMHG@ 68F
Solvent:
Aliphatic Hydrocarbon
 55-60% 100ppm 500ppm 2.0MMHG@ 68F
Additives:
Metal Soap Driers
Others
 
<3%
<1%
 
100ppm
N/A
 
500ppm
N/A
 
1.0MMHG@ 68F
N/A

"Pursuant to Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA) and 40 CFR Part 372, this product contains or may contain a toxic chemical in a quantity subject to the reporting requirements under Section 313"

Section III - Physical Data
Boiling Range: 300-390 F. Weight/Gallon: 8.76lbs.
Vapor Density: Heavier than Air: XX Lighter than Air:
Evaporation Rate: Faster than Ether: Slower than Ether: XX
Percent Organic Volatile by Volume: <60% Solubility in Water: NIL
Reactivity in Water: NIL
Appearance & Odor: Brown liquid with mild, sweet, aromatic odor.

Section IV - Fire and Explosion Hazard Data

Flammability Classification: OSHA: Combustible Flash Point: 100  F. TCC
Class: 3 LEL: 1.0%
DOT: Combustible UN Number: 1263
Extinguishing Media: Foam, CO2, or Dry Chemical.
Special Firefighting Procedures: Firefighters and others exposed to vapors or products of combustion should wear self-contained breathing apparatus with a full facepiece operated in pressure-demand or other positive pressure mode.
Unusual Fire and Explosion Hazards: Never use near or around welders or cutting torches because product (even just residue) or drum (even empty) can ignite explosively.

213  (solvent)