FARWEST PAINT PRODUCT INFORMATION

Specialty Coatings

X-3740 Fast-Dry Alkyd Mill Coat (Interior)

COLOR(S): White and Tints.

PRODUCT TYPE: Fast-Dry Flat Alkyd.

DESCRIPTION: A high-hiding alkyd base finish for use on interior walls and ceilings. It may be applied on wood, concrete and metal surfaces. Farwest X-3740 Fast-Dry Alkyd Mill Coat is known for its "Dry Fall" characteristics, very fast dry with excellent surface adhesion.

Intended Use: For interior wood, concrete, or metal surfaces.

PHYSICAL CHARACTERISTICS

VISCOSITY: 75 k.u.

DRY TO TOUCH: 10 minutes

WEIGHT SOLIDS: 74-76%

TACK FREE: 15-30 minutes

VOLUME SOLIDS: 50-52%

TIME TO RECOAT: 1-2 hours for rolling; immediate for spraying

WEIGHT PER GALLON: 12.70 lbs. per gal.

V.O.C.: 372 grams per liter

DRY HARD: 8 hours

FLASH POINT: 85° F.

COLOR RANGE: White and Tints

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 300-400 square feet per gallon depending on surface to be coated.

SURFACE PREPARATION: Surface to be coated should be free of oil, dirt and grease.

APPLICATION: Roller or spray.

THINNING: For Rolling: Thin with Farwest #602 Mineral Spirits. For Spraying: Thin with Farwest #605 Synthetic Thinner.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits or Farwest #605 Synthetic Thinner.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.