FARWEST PAINT PRODUCT INFORMATION

Varnish Coatings

X-4930 Gym Seal Floor & Trim Varnish (Interior/Exterior)

COLOR(S): Clear Gloss.

PRODUCT TYPE: Oil Modified Polyurethane Clear.

DESCRIPTION: An oil-modified polyurethane clear coating that provides good gloss and hold out. It performs well as an easy-to-apply gloss coating for wood floors, wood doors, or trim. Features of this polyurethane finish include excellent water resistance, good abrasion resistance, stain and household-chemical resistance to ensure long lasting beauty. This material also serves as a finish for wood trim on boats and the exterior of wood doors. For longer lasting of the finish it is best that the surface be treated with a stain containing iron oxide pigments, as these will help protect from UV (ultra violet rays) attack by the sun.

Intended Use: Finish coating for wood millwork, wood trim on boats, or interior and exterior wood doors.

PHYSICAL CHARACTERISTICS

VISCOSITY: 50 k.u.

DRY TO TOUCH: 1-2 hours

WEIGHT SOLIDS: 51-53%

TACK FREE: 3-4 hours

VOLUME SOLIDS: 43-45%

TIME TO RECOAT: Overnight

WEIGHT PER GALLON: 7.60 lbs. per gal.

DRY HARD: 8 hours

V.O.C.: 432 grams per liter

COLOR RANGE: Clear

FLASH POINT: 105° F.

PACKAGING: Qt., 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 400-600 square feet per gallon.

SURFACE PREPARATION: All surfaces to be coated must be thoroughly cleaned and free of dirt, waxes and oily residues. It is recommended for hardwood floors that the floor be sanded smooth and coated with suitable wood sealer, such as Farwest’s Matson X-5099 Lacquer Sanding Sealer, before applying the finish coat. When the surface has been stained with an oil wiping stain, best results are experienced if the sealer and finish are applied only after the stain is thoroughly dry. In most cases, an overnight dry is suitable.

APPLICATION: This material is best applied to wood millwork by means of conventional spray equipment but may be brushed with a fine china bristle brush. For floors, the use of a bristle brush applicator will provide good results.

THINNING: Thin if necessary with Farwest #602 Mineral Spirits.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits or Farwest #605 Synthetic Thinner.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.