FARWEST PAINT PRODUCT INFORMATION

Epoxy Coatings

X-6433 Series jarviflint Epoxy Coating

(X-6433A White Dull (Base Only)/X-6449A Clear Dull (Base Only)/ X-6435B Clear (Gloss Finish) (X-6415B Dull (Semi-Gloss Finish)/X-6448B Dull Dull (Flat/Satin Finish)/X-6642A Black Dull)

COLOR(S): Clear, White and Tints.

PRODUCT TYPE: 2 Component Polyester Epoxy Coating

DESCRIPTION: A polyester-epoxy, high performance, two component, catalyst-cured coating with excellent chemical resistance. Available in gloss, semi-gloss and eggshell finishes.

Intended Use: For metal, wood, or masonry including marine areas such as engine rooms, machinery, high traffic floors, deck houses, holds, passageways, cabinets, food handling equipment, lockers. Excellent for refinishing appliances, water tanks, steel office desks, or file cabinets.

PHYSICAL CHARACTERISTICS

VISCOSITY: 70 k.u. (mixed)

DRY TO TOUCH: 1 hour

WEIGHT SOLIDS: 70% +- 2% (mixed)

TACK FREE: 8 hours

VOLUME SOLIDS: 56% +- 2% (mixed)

TIME TO RECOAT: 24 hours

WEIGHT PER GALLON: 11.50 lbs. per gal. (mixed)

DRY HARD: 24 hours

V.O.C.: 373 grams per liter (mixed)

COLOR RANGE: Clear, White and Tints

FLASH POINT: 81° F. TCC

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 250 sq. ft. per gal. @ 20% loss.

POT LIFE: 8 hours @ 70° F.

SURFACE PREPARATION: Remove dirt, grease and foreign materials. Surface must be completely dry. A prime coat may be necessary. Sandblasting is recommended on bare metal surfaces, especially on marine and industrial exposures. Recommended primer for wood or metal: Farwest X-4959 Red Lacquer Proof Primer or Farwest X-4985 White Lacquer Proof Primer. Recommended primer for concrete masonry or metal: Farwest X-6390/X6392 Fast-Dry Epoxy Primer. Also, jarviflint can be self priming depending on type of substrate.

APPLICATION: Brush, roller or spray (conventional, airless or electrostatic). MIXING INSTRUCTION: Mix equal parts of Component A with Component B by volume. Let stand for 30 minutes before applying. Mix only enough for each day’s use.

THINNING: No thinning is necessary or recommended.

CLEAN-UP: Equipment and tools may be cleaned with Farwest #605 Synthetic Thinner or Farwest #610 Lacquer Thinner.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.