FARWEST PAINT PRODUCT INFORMATION

Industrial Paint Strippers

#646 Triple-Strength Paint Stripper

COLOR(S): Clear, Thixotropic Liquid.

PRODUCT TYPE: Methylene Chloride Solvent Blend Paint Remover.

DESCRIPTION: A fast acting paint stripper which contains no caustic, acid, or flammable solvent. This product readily removes paint, varnish, lacquer, baked enamel and shellac safely from most surfaces. It can be used on metal, wood and glass.

Intended Use: For removing paint, varnish, lacquer, baked enamel, or shellac from metal, wood, or glass.

PHYSICAL CHARACTERISTICS

VISCOSITY: Semi-Paste.

DRY TO TOUCH: N/A

WEIGHT SOLIDS: N/A

TACK FREE: N/A

VOLUME SOLIDS: N/A

TIME TO RECOAT: **

WEIGHT PER GALLON: 9.90 lbs. per gal.

DRY HARD: N/A

V.O.C.: 241 grams per liter

COLOR RANGE: Clear

FLASH POINT: N/A

PACKAGING: 1 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: N/A

** Recoat only after the stripped surface is dry and has been thoroughly cleaned.

APPLICATION: Apply a heavy coat over surface with an inexpensive or used brush which may be discarded after use. Allow to set for 10 to 30 minutes or until the surface is broken, then scrape off with a spatula or steel wool. All surfaces to be refinished, after the stripping process is completed, should be thoroughly cleaned after the paint stripper has been used. A sweeping wash with water and denatured alcohol will normally assure that the substrate is clean enough to be painted. Some painted surfaces may require more than one application of the stripper to remove stubborn areas.

THINNING: DO NOT REDUCE.

CLEAN-UP: Clean up tools and adjacent areas with warm, soapy water.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.