FARWEST PAINT PRODUCT INFORMATION
Exterior Finish Coatings
#6500 Series Wonderflex Elastomeric Acrylic Coating
(#6500 White / #6510 Deep Base / #6515 Ultra Deep Base / #6535 Neutral Base)
COLOR(S): White and Tints.
PRODUCT TYPE: Highly Elastic Pure Acrylic Pigmented Coating.
DESCRIPTION: Farwest Wonderflex Acrylic Elastomeric is a high solids, extremely flexible coating designed for use on wood, concrete, masonry, brick or metal surfaces. Wonderflex provides excellent adhesion to previously coated surfaces.
PHYSICAL CHARACTERISTICS
VISCOSITY: 98-102 k.u.
DRY TO TOUCH: 45 minutes-1 hour
TO HANDLE: 1-2 hours
DRY HARD: 8 hours
TIME TO RECOAT: 1.5-2 hours
WEIGHT SOLIDS: 63-65%
VOLUME SOLIDS: 49-51%
WEIGHT PER GALLON: 11.90 lbs. per gal.
V.O.C.: 18 grams per liter
COLOR RANGE: White and Tints
FLASH POINT: N/A
PACKAGING: 1 or 5 gallon containers
BATCH: Stock
PRACTICAL COVERAGE: 100 square feet per gallon @ 5 mils dry.
NOTE: KEEP THIS PAINT FROM FREEZING. DO NOT STORE AT TEMPERATURES BELOW 35° F.
SURFACE PREPARATION: The surface to be coated must be free of all dirt, oil, grease, form release agents and chipping paint.
APPLICATION: Apply Wonderflex by brush, roller, or spray. Apply the first coat at a rate of approximately 100 square feet per gallon, which is approximately 10 mils wet and 5 mils dry. Do not apply at temperatures below 40° F. It is recommended to build the film in 2 coats to avoid "mud cracking". Apply the second coat at approximately the same rate as the first coat. New wood should be primed with Farwest #710 Exterior Oil Primer; new or old metal surfaces should be primed with X-6946 Hi-Solids Red Oxide Primer or Farwest X-6948 Hi-Solids Gray Primer.
THINNING: Thin with regular clean tap water only as necessary.
CLEAN-UP: Tools and equipment may be cleaned with warm, soapy water.
LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.