FARWEST PAINT PRODUCT INFORMATION

Lacquer Coatings

X-6527 Aquathane Waterborne Lacquer Finish

COLOR(S): Clear and Tints.

PRODUCT TYPE: Modified Acrylic W/B Lacquer.

DESCRIPTION: A waterborne, easy-to-apply complete wood finishing system. Grain raise and dry finish are not a problem and, in most cases, stain and finish may be recoated within one hour or less. The solids content in this system is higher than conventional nitrocellulose lacquers or oil-based stains making film build and aesthetic looks better than conventional systems. This is a high quality acrylic which is non-yellowing, highly durable and stain resistant.

PHYSICAL CHARACTERISTICS

VISCOSITY: 65-70 k.u.

DRY TO TOUCH: 30-45 minutes

WEIGHT SOLIDS: 22-23%

TACK FREE: 2 hours

VOLUME SOLIDS: 19-20%

TIME TO RECOAT: 3 hours

WEIGHT PER GALLON: 8.50 lbs. per gal.

DRY HARD: 3 hours

V.O.C.: 340 grams per liter

COLOR RANGE: Clear and Tints

FLASH POINT: N/A.

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 250-350 square feet per gallon depending on surface to be coated.

SURFACE PREPARATION: The surface to be coated must be clean, dry and free of oil, dirt and grease. For best results, the surface should be thoroughly smooth sanded before applying the first coat of color or finish.

APPLICATION: Brush, roller, conventional or airless spray.

THINNING: No thinning is necessary or recommended.

CLEAN-UP: Tools and equipment may be cleaned with warm regular tap water. It is best to clean-up as soon as is possible as this material develops rapid water resistance.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.