FARWEST PAINT PRODUCT INFORMATION

Specialty Products

X-6708 Endurathane MCU Tar

COLOR(S): Black.

PRODUCT TYPE: Moisture Cure Urethane Tar Coating.

DESCRIPTION: Moisture-Curing, Single-Component Hi-Build Coating, V.O.C. compliant.

Intended Use: Concrete and steel splash zone, wastewater treatment, pipelines, anchor chains, and humid environments. Areas where coal tar epoxies normally would be utilized.

PHYSICAL CHARACTERISTICS

VISCOSITY: 55-60 k.u.

DRY TO TOUCH: 2 hours

WEIGHT SOLIDS: 64-66%

TACK FREE: 4 hours

VOLUME SOLIDS: 57-59%

TIME TO RECOAT: 8-24 hours

WEIGHT PER GALLON: 9.0 lbs. per gal.

DRY HARD: 8 hours

V.O.C.: 387 grams per liter

COLOR RANGE: Black.

FLASH POINT: 90° F.

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 160 square feet per gallon @ 6 mils.

SURFACE PREPARATION: BARE STEEL: Immersion - SSPC-SP10 Near-white metal blast. Non-immersion - SSPC-SP6 Commercial blast. CONCRETE: Sandsweep or waterblast to remove existing contaminants and any laitance.

APPLICATION: Brush, roller, or spray.

THINNING: Thinning is not usually recommended. However, if thinning is necessary, use only Endurathane Reducers.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #605 Synthetic Thinner.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.