FARWEST PAINT PRODUCT INFORMATION

Metal Conditioners

#695 Rynolite Chemical Cleaner-Etcher

COLOR(S): Clear, Colorless Liquid.

PRODUCT TYPE: Phosphoric Acid Metal & Concrete Pretreatment Solution.

DESCRIPTION: Rynolite Chemical Cleaner-Etcher cleans metal and removes rust. It attacks rust, corrosion and oxidation from screw threads, grooves and crevices as well as smooth surfaces. Oil, grease,dirt, exhaust and chemical stains disappear quickly and completely. Tested and approved by aluminum manufacturers for use on all aluminum products. Removes easily and safely exhaust and chemical stains, oxides and corrosion from aluminum, zinc and cadmium plate as well as iron and steel. Rynolite Chemical Cleaner-Etcher is an excellent pretreatment solution to be used on concrete floors prior to application of coatings and sealers by removing unwanted contaminants from the floor and neutralizing lime and by-products on the surface which may seriously impair the coatings’ ability to form a good bond to the concrete.

Intended Use: Removes stains, oxides and corrosion from metal and other surfaces.

PHYSICAL CHARACTERISTICS

VISCOSITY: N/A

DRY TO TOUCH: N/A

WEIGHT SOLIDS: N/A

TACK FREE: N/A

VOLUME SOLIDS: N/A

TIME TO RECOAT: N/A

WEIGHT PER GALLON: 9.70 lbs. per gal.

DRY HARD: N/A

V.O.C.: 79 grams per liter

COLOR RANGE: N/A

FLASH POINT: N/A

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: Approximately 200 square feet per gallon on masonry surface--500 square feet per gallon on metal and glazed tile.

DIRECTIONS FOR USE: Use full strength to condition all metals prior to painting. Excellent for etching galvanized metals prior to painting. Rinse surfaces thoroughly with clear water before solution dries and resets on the surface. Do not use in direct sun or on hot surfaces. Before painting concrete: Use to etch concrete floors, walls, walks, patios, steps and swimming pools. Use full strength. Apply 15-30 square feet at a time agitating with a stiff brush for 10 minutes. Rinse or flush thoroughly. Damp mop surface to pick up excess moisture and residue. Allow surface to dry before applying finish. Use to brighten, clean and remove oxidation on copper, brass, marble vitreous china, on fixtures, boats, shower stalls, heating, refrigeration and water systems. Use one part Farwest Chemical Cleaner Etcher to three parts water. DO NOT USE ON PORCELAIN SINKS, TUBS OR OTHER PORCELAIN SURFACES.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.