FARWEST PAINT PRODUCT INFORMATION

Interior Finish Coatings

#900 Series Wonderglo® Interior Flat Acrylic Latex

(#900 White/#910 Deep Base/#915 Ultra Deep Base)

COLOR(S): Whites and Tints.

PRODUCT TYPE: Vinyl Acrylic Latex Paint.

DESCRIPTION: A top-of-the-line high quality vinyl acrylic emulsion for interior surfaces of drywall, plaster, brick, cement, or masonry. Dries to a flat even uniform finish that is tough, durable and scrubbable. It can be used on any interior wall surface.

Intended Use: For interior drywall, plaster, brick, cement, or masonry.

PHYSICAL CHARACTERISTICS

VISCOSITY: 93-96 k.u.

DRY TO TOUCH: 30 minutes

WEIGHT SOLIDS: 49-54%

TACK FREE: 1 hour

VOLUME SOLIDS: 33-35%

TIME TO RECOAT: 2 hours

WEIGHT PER GALLON: 11.0-11.80 lbs. per gal.

DRY HARD: 8 hours

V.O.C.: 55 grams per liter

COLOR RANGE: Whites and Tints

FLASH POINT: N/A

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 300-400 square feet per gallon depending on the porosity of the surface to be coated.

SURFACE PREPARATION: Surface to be coated must be clean, dry, free from all foreign agents and properly prepared.

APPLICATION: Brush, roller, or spray. When brushing, best results can be obtained by using a good quality nylon bristle brush.

THINNING: Thinning is not recommended however, if necessary, use regular clean tap water. FOR SPRAY APPLICATION: Thin only as necessary to provide spray pattern without runs or sags with clean regular tap water.

CLEAN-UP: Clean all tools and equipment as soon as possible with warm, soapy water.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.