FARWEST PAINT PRODUCT INFORMATION

Government Spec.-Type Coatings

X-7208 to X-7213 Commercial Equivalent to
MIL-E-24635 Silicone Alkyd Copolymer Enamel

COLOR(S): Wide Range of Colors.

PRODUCT TYPE: Exterior Silicone Alkyd Copolymer Enamel. Type II Class 1 Gloss and Class 2 Semi-Gloss.

DESCRIPTION: MIL-E-24635 is highly weather-resistant and provides excellent color and gloss retention, good drying and good flexibility.

Intended Use: For interior or exterior metal surfaces.

PHYSICAL CHARACTERISTICS

VISCOSITY: 90-100 k.u.

DRY TO TOUCH: 2 hours

WEIGHT SOLIDS: 70-72%

TACK FREE: 3 hours

VOLUME SOLIDS: 54-56%

TIME TO RECOAT: Overnight

WEIGHT PER GALLON: 10.10 lbs. per gal.

DRY HARD: 8 hours

V.O.C.: 340 grams per liter

COLOR RANGE: Wide Range of Colors

FLASH POINT:105° F.

PACKAGING: 1 or 5 gallon containers

BATCH: Stock

PRACTICAL COVERAGE: 350-500 square feet per gallon depending on the surface and specific application.

SURFACE PREPARATION: METAL: New metal should be etched with Farwest #695 Rynolite Chemical Cleaner-Etcher or Farwest X-5679 Phos-Pro Metal Conditioner; then rinsed, allowed to dry and then primed with Farwest X-1184 Quickset Red Oxide Primer. OLD & RUSTED METAL: Should be wire brushed and washed with a suitable solvent or degreasing solution such as Farwest #644 Gloss Set, followed by an application of Farwest #695 Rynolite Chemical Cleaner-Etcher and then rinsed according to instructions on the label. IRON & STEEL: Should be primed with Farwest X-1184 Quickset Red Oxide Primer.

APPLICATION: Brush, roller, or spray.

THINNING: Thin if necessary with Farwest #602 Mineral Spirits or Farwest #605 Synthetic Thinner.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits or Farwest #605 Synthetic Thinner.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.