FARWEST PAINT PRODUCT INFORMATION

Government Spec.-Type Coatings

TT-P-645B Zinc-Molybdate Alkyd Primer

(Commercial Equivalent TT-P-645B)

COLOR(S): Yellow.

PRODUCT TYPE: Zinc-Molybdate Alkyd Type Primer

DESCRIPTION: A Zinc Molybdate Alkyd general primer for applications to steel and aluminum. It has a low sheen and is known for a low volatile organic content (2.8 lbs./gal. and 340 grams/liter).

Intended Use: General primer for steel and aluminum.

PHYSICAL CHARACTERISTICS

VISCOSITY: 78 k.u.

DRY TO TOUCH: 4-6 hours

WEIGHT SOLIDS: 74.27%

TACK FREE: 1 Hour

VOLUME SOLIDS: 51.2%

TIME TO RECOAT: 6-8 hours

WEIGHT PER GALLON: 12.8 lbs. per gal.

DRY HARD: 8 Hours

V.O.C.: 2.8 lbs./gal and 340 grams/liter

COLOR RANGE: Yellow

FLASH POINT: 104° F.

PACKAGING: 1 or 5 gallon containers

BATCH: 100 gallons (minimum)

PRACTICAL COVERAGE: Approximately 300-400 square feet per gallon.

SURFACE PREPARATION: Surface to be coated must be free of dirt, oil and grease prior to primer application.

 APPLICATION: Brush, roller, or spray.

 THINNING: Not recommended but if necessary thin with Farwest #602 Mineral Spirits.

CLEAN-UP: Tools and equipment may be cleaned with Farwest #602 Mineral Spirits.

LIMITED WARRANTY. To the best of our knowledge, the technical data presented above is true and accurate at the date of issuance and subject to change without prior notice. Farwest Paint Manufacturing Co. guarantees its products to conform to its standards of quality control. Liability is limited to replacement of product. No other warranty or guarantee of any kind is made by Farwest Paint Manufacturing, implied or otherwise.