Farwest Paint Manufacturing Co.
4522 South 133rd Street
Tukwila, Washington, 98168
http://www.farwestpaint.com
Sections I-IV (This Page) / Sections V-X (Click Here)
Material Safety Data Sheet
For Coatings and Related Materials
Prep: June 1994 Update: Current
 
Section I  - Product Identification
24 Hour Emergency Assistance
Emergency (Chemtrec) (800) 424-9300
Information  (Farwest) (206) 244-8844
Product Number: 209

Product Name: White Porch & Deck Enamel

Product Class: Pigmented, Modified Alkyd Resin Solution
   Hazard Rating
           0             Lowest
           1                  |
           2                  |
           3                  |
           4           Extreme
This Product
   Health: 2
   Flammability: 1
   Reactivity: 1
   Personal Protection: G

Section II - Hazardous Ingredients
Ingredient CAS Number Percent (By Weight)

Occupational

TLV (ACGIH)

Exposure

PEL (OSHA)
Mineral Spirits 8052-41-3 40-45% 100ppm 100ppm

"Pursuant to Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA) and 40 CFR Part 372, this product contains or may contain a toxic chemical in a quantity subject to the reporting requirements under Section 313"

Section III - Physical Data
Boiling Range: 300-390 F. Weight/Gallon: 11.65 lbs.
Vapor Density: Heavier than Air: XX Lighter than Air:
Evaporation Rate: Faster than Ether: Slower than Ether: XX
Percent Organic Volatile by Volume: <43% Solubility in Water: NIL
VOC: 349 Grams/Liter (Less Water) Reactivity in Water: NIL
Appearance & Odor: White liquid with mild, sweet aromatic odor.

Section IV - Fire and Explosion Hazard Data

Flammability Classification: OSHA: Combustible Flash Point: 100  F. TCC
Class: 3 LEL: 1.0%
DOT: Combustible UN Number: 1263
Extinguishing Media: Foam, CO2, or Dry Chemical.
Special Firefighting Procedures: Firefighters and others exposed to vapors or products of combustion should wear self-contained breathing apparatus with a full facepiece operated in pressure-demand or other positive pressure mode.
Unusual Fire and Explosion Hazards: Never use near or around welders or cutting torches because product (even just residue) or drum (even empty) can ignite explosively.

209  (solvent)